Made in Italy
Description
Programmable LED dimmer 4÷400W 230Vac with state memory for installation in standardized recessed socket boxes and junction boxes.
It should be used in dry and non-dusty places. The particular technology used guarantees the complete absence of acoustic hum. It is suitable for regulating loads, resistive, inductive, dimmable LEDs and 230Vac LED strips as per the installer manual, with 230V voltage supply with maximum power 4÷400W.
Switching on and off always occurs gradually using the "soft-start" and "soft-down" functions. Switching on, switching off and adjusting the load are carried out by acting on the extender buttons, all referring to the phase or all referring to the neutral. Using short duration pulses, the load is switched on and off. By holding down one of the control buttons, the brightness level increases until reaching the maximum. By repeating this command the brightness level drops until it reaches the minimum.
Datasheet
• Dimmable LED lamps in Leading edge
• LED STRIP dimmable in central edge
• Trailing edge dimmable LED lamps
• Toroidal Transformers + LV LEDs. dimmable at full load in Leading edge
• Toroidal + Halogen LV Transformers. dimmable Leading edge
• Dimmable electronic transformers + LV LEDs. dimmable Trailing edge
• Dimmable electronic transformers + LV halogen. dimmable Trailing edge
• Halogen and filament lamps 4÷400W 230Vac
• Electric fans (single power max. 100W 230Vac) Leading edge
Downloads
Properties
