-
x
Description
Axial dimmer for Gewiss Chorus Evo domestic series with front hooking which makes the assembly and unhooking operations of the sockets much simpler and quicker without the need to remove the support.
The trailing edge load driving mode (max. 5 lamps). Two axially operated local buttons for dimming the connected load and equipped with 2 inputs to replicate the local control of the load via the auxiliary module GW10679, GW10680 or NO type buttons or to implement the centralization OFF function.
Using the dedicated inputs it is possible to add load activations through the auxiliary axial modules, or NO type buttons, or, through programming, it is possible to set the inputs for the centralization OFF function.
The devices are equipped with configurable blue LEDs that can be set to OFF, localization or signaling mode of the connected load.
To avoid the onset of overheating, the installation of multiple dimmers side by side inside the same container is not permitted; we recommend inserting a blanking module between two electronic devices.
If two dimmers are installed in the same box, the maximum loads that can be controlled by each dimmer must be reduced by 50%.
The device must be completed with the GW10553S or GW10557S front button
Compatible with GW168** mounts
Datasheet
Technical specifications:
• Number of modules 1
• Chorus Evo model
Certifications:
• THERE IS
• IMQ
Properties
Warnings: |
|
Accessories
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included
-
€1.31pcsVAT included