Tecnel TE44895N - regulator for LED lamps

Electronic regulator for TECNEL adapters with Keystone coupling compatible with the domestic series on the market. It should be used in dry, non-dusty places at temperatures between -5°C and +30°C.

The particular technology used guarantees the complete absence of acoustic hum coming from the dimmer. It is suitable for the regulation of dimmable LED lamps with leading edge technologies powered directly at 230Vac, STRIP LED 230Vac and full load mechanical transformers with LED lamps in BT with overall power ranging from 4 to 100W 230Vac, CV power supplies STRIP LED DIM TRI and DIM TRI Dimmable Triac Mosfet LED DC Drivers. Switching on and off always occurs gradually using the functions. of "soft-start" and "soft-down".

The controlled load adjustment is carried out by rotating the control knob which acts on the adjustment potentiometer. Rotating the control knob clockwise continuously linearly increases the adjustment level.

The controlled load is switched on and off by pressing the control knob which acts on a "Push-Push" diverter incorporated in the dimmer and coaxial to the adjustment potentiometer.

For correct operation it is necessary to calibrate the minimum anti-flicker adjustment level. Calibration is carried out by acting with the blade of a small screwdriver on the notch of the calibration trimmer located on the back of the dimmer. Once the minimum has been adjusted to a certain value, even by acting on the main potentiometer the load brightness level does not fall below the set minimum value: complete switching off is only possible by acting on the diverter.