Minidue filter dosing pump 1/2" F
Often bought together
Description
Minidue filter the innovative dosing pump with a combined system since it includes an 89 micron stainless steel mechanical filter housed on the head, and a shut-off tap that allows the filter to be dismantled without placing the circuit in by-pass! This entire system in small dimensions, to allow easy installation even under the boiler. What is a dispenser? It is a mandatory device (The Ministerial Decree of 26 June 2015, Annex 1 to chapter 2.3.5, introduced the obligation of chemical treatment for each type of system) in new installations or replacements, to be installed at the boiler inlet in the cold water pipe, which performs an anti-scale and anti-corrosion function.
Datasheet
• 1/2"F connections
• Minimum/maximum pressure 1.5 - 10 bar
• Min/max water temperature 5 - 30 °C
• Min/max ambient temperature 5 - 40 °C
• Min/max water hardness 5 - 35 °f
• Minimum starting flow rate 0.18 - 3.0 m3/h - L/min
• Maximum temperature for treated water storage 60 °C
• Maximum instantaneous temperature for treated water 80 °C
• Visual check of remaining bag content
• Connection plate and filter cartridge housing made of brass
• Pump body made of plastic material
• Stainless steel filter cartridge clamped on bushing with o-ring seal
• Filtration degree of the filter cartridge 89 μm
Package contents:
• 1 PM106 self-priming mechanical volumetric dosing pump
• Quick guide
Anything not listed must be ordered separately
Properties
Cerifications:
C E











